Home How Tos How to Root Samsung Galaxy S9 | S9+ and Install TWRP Recovery

How to Root Samsung Galaxy S9 | S9+ and Install TWRP Recovery

Root samsung galaxy s9 and s9 plus

Root samsung galaxy s9/s9+ and Install TWRP Recovery Tutorial.

Samsung has launched their new flagship devices, the Galaxy S9 and the Galaxy S9+. This guide you how to get the root access on Samsung Galaxy S9, S9+ and Install TWRP Recovery. Once the phone is rooted you can enjoy lots of rooted apps, install Magisk Module, and Install the Xposed module on your phone. So let’s get started and root Galaxy S9, S9+.

How to Root Samsung Galaxy S9, S9+

Root samsung galaxy s9 and s9 plusRead all the steps very carefully and follow the steps below to successfully root and Install TWRP Recovery on Samsung Galaxy S9 and S9 Plus. Warranty may be void of your Galaxy S9 (or S9 Plus) if you follow the procedures given on this page. XCLUSIVETEK is not responsible for any damage that might happen to your phone during this process. You’ll lose all your data upon unlocking bootloader.

Pre-requisites to Root Galaxy S9, S9+

1. Check the phone model of your phone. This method will work only on these models SM-G960F/FD/N (s9) and SM-G965F/FD/N (S9+).
2. Take the Full backup of your phone.
3. Make sure that your phone’s battery is above 80%.
4. A USB cable to connect your phone to the PC.

Download Link 

READ>>  How to edit APN settings and enable Native Hotspot on Galaxy Note 8

How to Install TWRP Recovery on Galaxy S9, S9+

Step 1. Enabled the OEM Unlock option in Settings. Go to Settings > About phone, and then tap ‘Build number’ 7 times or until you see the ‘you’re now a developer’ message pop up. Now you will see the developer option in the Settings. Now, look for OEM Unlock, and select it using its toggle button.Galaxy S9 Enable Developer Options

Step 2. Now unzip the ODIN folder on your desktop. In the folder, you will see the ODIN exe file. You have to use this app to install the TWRP recovery on your Samsung Galaxy S9, S9+.

Step 3. Now time to boot your phone into the Download Mode. To do this Power off your Galaxy S9. Wait 6-7 seconds after screen goes off. Now Press and hold the three buttons Power + Bixby + Volume down buttons together until you see the Warning screen. Press Volume Up to continue to download mode.

Step 4. Now your phone is in download mode. Connect your phone to the PC with USB cable.

Step 5. Now run the ODIN app on your PC and you will see the ADDED message on the ODIN screen. That means your phone is connected to the ODIN.

Step 6. Now Load the TWRP file into Odin. For this, click the AP button on Odin and the select the TWRP file in the .TAR format.

Step 7. Make sure Re-partition and Auto Reboot checkbox are NOT selected, under the ODIN Options tab.

Step 8. Now everything is ready. Click the Start button on Odin to flash the TWRP recovery on your phone.

READ>>  How To Activate Multiplayer Mode On PES 2018 ISO PPSSPP On Android

Note: In case your PC fails to recognize your device, install the Samsung USB drivers for your device

Galaxy S9 Odin Start

Step 9. Once the files are flashed, you will see the PASS messages on the ODIN screen.

How to Root Samsung Galaxy S9, S9+

Step 1. After following the Step 9 form the above method. Your phone is still on the download mode.

Step 2. Now boot your phone in TWRP recovery mode. Press and hold Volume down + Bixby + Power button together until the phone turn off, but once the phone is off, do this quickly: while still holding the Power and Bixby button, press Volume Up in place of Volume down button to reboot into recovery mode.

Step 3. Now your phone will boot into TWRP mode. From here select allow for System modification. After that tap on Wipe option, and and then select Format Data option. Swipe now to format data partition.

Step 4. Now connect your phone to the PC. And transfer the SuperSU or Magisk file to your phone.

Step 5. Now tap on the Install button on your TWRP and then select the SuperSU/Magisk zip file. Then do the swipe action at the bottom to install the root tool.

Step 6. After that tap on Reboot option, and then on System to restart your Galaxy S9, which will now have root access.

Now you successfully installed the TWRP and Root Samsung Galaxy S9, S9+. For any questions on How to Root Samsung Galaxy S9 | S9+ and Install TWRP Recovery, drop your name, email and questions in the comment below.

READ>>  How To Root Moto G5S Plus and Install TWRP Recovery

Via- XDA


Please enter your comment!
Please enter your name here